Press and move to zoom
Mouse over image to zoom

VELCRO® Sticky Back 5/8in Circles White 15 Ct

0.62" (15.7 mm) Length x 0.62" (15.7 mm) Width - White - For Glass, Plastic, Metal, Smooth Surface, Indoor, Outdoor, Home, Office, School - 15 / Pack

Hamster: 114181
Manufacturer Part No: 90070

Online

809 in-stock

  • Holds up to 5 lbs (1 lb per 1" square)
  • Long lasting nylon construction with simple peel and stick application
  • Ideal for smooth surfaces, including walls, glass, tile, and plastic
  • For keeping things organized and connected
Manufacturer
Velcro Companies
Manufacturer Part Number
90070
Manufacturer Website Address
Brand Name
VELCRO®
Product Line
Sticky Back
Product Name
Sticky Back 5/8in Circles White 15 Ct
Marketing Information
Adhesive-backed round coins adhere to almost any smooth surface including walls, glass, tile and plastic. Use on walls, glass, tile, plastic or metal. Sticky Back Coins work with other fasteners or adheres to themselves. Simply peel and stick.

More from the Manufacturer

Packaged Quantity
15 / Pack
Product Type
Hook & Loop Fastener
Tape Width
0.62" (15.7 mm)
Tape Length
0.62" (15.7 mm)
Application/Usage
  • Glass
  • Plastic
  • Metal
  • Smooth Surface
  • Indoor
  • Outdoor
  • Home
  • Office
  • School
Features
  • Self-adhesive
  • Sticky
  • Strong
  • Peel & Stick
  • Durable
  • Long Lasting
  • Precut
Color Family
White
Product Color
White
Additional Information
Shape:

Circles

Care and Application:

Instructions:

  • Clean and dry surface before application.
  • Peel tape from fastener and press firmly into place.
  • Adhesive reaches maximum strength after 24 hours.

Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.

Removal Instructions

  • Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
  • Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
  • Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
  • Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
  • Stick the ball on the adhesive which is on your substrate and pull it off
  • Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
  • If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 5 lbs

Functional Temperature Range:

0-100° F (-18-38° C)

Recycled
No
Assembly Required
No
Country of Origin
Mexico